Insert 3.5mm aux cable into either jack socket to turn subwoofer on
Press and hold the button for 2s or more to turn the subwoofer off
Press and hold the button for 2s or more to turn the subwoofer on
Remove all 3.5mm aux cables to turn the subwoofer off
The subwoofer will not turn on using the button alone.
Insert the audio cable into this socket first to start in high volume (high gain) mode
Insert the audio cable into this socket first to start in low volume (low gain) mode
Press the button (do not hold) to change between LOW and HIGH gain modes
Plug the charging cable provided into any USB socket
Plug the round barrel connector into the middle socket of the subwoofer
The LED will start fading
The LED will stop fading when charging is complete
When the subwoofer is on, the colour of the LED will represent the battery level
PURPLE = 0-25%
BLUE = 25-50%
CYAN = 50-75%
GREEN = 75-100%
When the subwoofer is off, press the button (do not hold). The LED will light up to show the battery status
Turn the Minirig on in Bluetooth mode and play music
Turn the subwoofer on by inserting 3.5mm cable
Plug the other end into either socket of the Bluetooth Minirig
Use the button to change gain if you wish. For the best sound, keep them both in the same gain mode
Plug your music device into the first Minirig using an aux cable and play music
Link out from the first Minirig to the subwoofer using 3.5mm aux cable
Continue to add as many speakers as you like
Toggle the gain on the Minirigs and subwoofer so they all play at the same volume
To setup stereo sound, refer to the Minirig 3 or Minirig Mini how to guides
Plug the standard audio aux cable into the 3.5mm headphone socket of your phone or device
Plug the other end into either socket of the subwoofer. We recommend the low gain socket
Plug the 4-pole end of the stereo splitter cable into the free socket on the subwoofer. The cable can be purchased from our website
Plug the white end to the left Minirig and red end to the right Minirig. Change gain setting as required.
Press and hold the button on the subwoofer to turn the subwoofer and the Minirigs off and on (Works with Minirig v1, v2, v3)
Plug your devices charging cable into the subwoofer charging cable socket labeled “OUT”
Plug your phones charging cable into the charging socket on your phone
Plug the round barrel connector into the middle socket of the Subwoofer
Ensure the Subwoofer is turned OFF then press the button (do not hold) to activate power out
Turn on both Minirigs in Bluetooth mode
Start playing some music through one of the Minirigs
Press the button on that Minirig TWICE (two short presses) to start the pairing process. The LED will flash WHITE and RED
After around 20-60 seconds they will connect and music will play through both speakers. You will hear a happy tone and the Minirig will stop flashing.
Once they are connected, plug the subwoofer into either speaker. We recommend the master (left) speaker. Change the gain settings as required
Note that the subwoofer will play the left channel only when connected to the left speaker and right when connected to the right speaker.
Turn on both Minirigs in Bluetooth mode
Start playing some music through one of the Minirigs
Press the button on that Minirig TWICE (two short presses) to start the pairing process. The LED will flash WHITE and RED
After around 20-60 seconds they will connect and music will play through both speakers. You will hear a happy tone and the Minirig will stop flashing.
Once they are connected, plug one subwoofer into each speaker. The subwoofers will play in stereo along with the Minirigs. Change the gain settings as required.
For the best sound, open the app and select “2.2 stereo mode” in the audio settings page. You can adjust the levels from here also.
Turn all the Minirigs on in Bluetooth mode
Connect to one and start playing music
Press the button FOUR times on that Minirig. The LED will flash BLUE/WHITE. This speaker will host the link up
Press the button on other Minirigs THREE times.The LED will flash GREEN/WHITE.
When they pair, you will hear a tone and they will start playing music
Connect your subwoofers to any of the speakers using the aux cable. We recommend starting with the master speaker.